Application proposal for white marble from the Gran Piedra saw
Keywords:
white marble; Gran Piedra saw; physical-mechanical análisis; chemical composition; trace elements.Abstract
In this work, a proposal of applications was made for the white marble of the Sierra de La Gran Piedra, Santiago de Cuba, Altos de Mapú manifestation, based on its chemical composition and physical-mechanical characteristics. For this, certified chemical procedures such as ICP-OES and flame photometry were applied and various physical-mechanical parameters were determined, in accordance with the established standards. A high content of CaCO3 was found in the white marble (99,02 %), as well as a low proportion of the rest of the components. According to the resistance to bending and crushability, its use for the construction of pavements or similar and concrete aggregates for heavy traffic was ruled out. However, the rest of the parameters are comparable to other marbles, so it can be used for a large number of commercial applications.
References
KLEIN, C.; CORNELIUS JR., S. Manual de mineralogía. Vol. 2. Edtion ed. España: Reverté, 2018. ISBN: 8429194568.
SUFIAN, M. et al. "An experimental and empirical study on the use of waste marble powder in construction material". Materials, 2021, 14 (14), 3829. ISSN: 1996-1944. http://dx.doi.org/10.3390/ma14143829
KULALI, F. "Simulation studies on the radiological parameters of marble concrete". Emerging Materials Research, 2020, 9 (4), 1341-1347. ISSN: 2046-0147. http://dx.doi.org/10.1680/jemmr.20.00307
TUNC, E. T. "Recycling of marble waste: A review based on strength of concrete containing marble waste". Journal of environmental management, 2019, 231, 86-97. ISSN: 0301-4797. http://dx.doi.org/10.1016/j.jenvman.2018.10.034
BEZERRA, W. B. A. et al. “Effect of the incorporation of marble waste in the properties of clay ceramic bricks”. In Materials Science Forum. Trans Tech Publ, 2020, vol. 1012, p. 250-255. ISSN: 1662-9752.
AYDIN, E.; AREL, H. Ş. "High-volume marble substitution in cement-paste: Towards a better sustainability". Journal of Cleaner Production, 2019, 237, 117801. ISSN: 0959-6526. http://dx.doi.org/10.1016/j.jclepro.2019.117801
DA COSTA, I. T.; DE CARVALHO, C. S.; DE OLIVEIRA, J. R.; VIEIRA, E. A. "Physical properties characterization of a peritectic mold flux formed from the addition of calcitic marble residue in the commercial one". Journal of Materials Research and Technology, 2019, 8 (3), 3297-3305. ISSN: 2238-7854. http://dx.doi.org/10.1016/j.jmrt.2019.03.005
SHIN, D. et al. "Multifunctional liquid marble compound lenses". ACS applied materials & interfaces, 2019, 11 (37), 34478-34486. ISSN: 1944-8244. http://dx.doi.org/10.1021/acsami.9b12738
BENAVENTE, D.; PLA, C.; VALDES-ABELLAN, J.; CREMADES-ALTED, S. "Remediation by waste marble powder and lime of jarosite-rich sediments from Portman Bay (Spain)". Environmental Pollution, 2020, 264, 114786. ISSN: 0269-7491. http://dx.doi.org/10.1016/j.envpol.2020.114786
MECCHERI, M. et al. "The Carrara marbles (Alpi Apuane, Italy): a geological and economical updated review". Zeitschrift der Deutschen Gesellschaft für Geowissenschaften, 2007, 719-736. ISSN: 1860-1804. https://doi.org/10.1127/1860-1804/2007/0158-0719
CARTAYA-PIRE, M.; RUIZ-BATISTAPAU, L.; OTAÑO-NOGEL, J. "Caracterización geomecánica de las rocas ornamentales del yacimiento Bottichino I, provincia de Granma". Minería y Geología, 2018, 34 (3), 289-301. ISSN: 1993-8012. http://scielo.sld.cu/scielo.php?script=sci_arttext&pid=S1993-80122018000300004
HEREDIA-NORIEGA, M.; SOSA-DIAZ, J. "Rocas ornamentales del Oriente de la Isla de Cuba". Geogaceta, 1996, 3 (20). ISSN: 0213-683X. http://hdl.handle.net/10272/12398
CUBA, O. N. D. N. D. L. R. D. (2015). Determinación de absorción (NC 1103). https://ftp.isdi.co.cu/Biblioteca/BIBLIOTECA_UNIVERSITARIA_DEL_ISDI/COLECCION_DIGITAL_DE_NORMAS_CUBANAS/2015/nc_724_a2015_24p_fsm.pdf&usg=AOvVaw1n_kI3Xw1md67-CHQ3Oal1
CUBA, O. N. D. N. D. L. R. D. (2014 ). Minerales - análisis granulométrico por tamizado - requisitos generales https://ftp.isdi.co.cu/Biblioteca/BIBLIOTECA%2520UNIVERSITARIA%2520DEL%2520ISDI/COLECCION%2520DIGITAL%2520DE%2520NORMAS%2520CUBANAS/2014/NC%2520631%2520a2014%252012p%2520mgk.pdf
CUBA, O. N. D. N. D. L. R. D. (2003). Densidad de materiales naturales, artificiales y de elementos de construccion como carga de diseño. (NC 283).
CUBA, O. N. D. N. D. L. R. D. (1985). Determinación de la resistencia a la compresión (NC 54-032).
CUBA, O. N. D. N. D. L. R. D. (1983). Determinación de resistencia a la flexión de las rocas (NC ).
CUBA, O. N. D. N. D. L. R. D. (2002). Áridos gruesos. Abrasión. Método de ensayo (NC 188).
CUBA, O. N. D. N. D. L. R. D. (2002). Áridos gruesos. Determinación del índice de triturabilidad (NC 190).
SÁEZ-PÉREZ, M.; RODRÍGUEZ-GORDILLO, J. "Structural and compositional anisotropy in Macael marble (Spain) by ultrasonic, XRD and optical microscopy methods". Construction and Building Materials, 2009, 23 (6), 2121-2126. ISSN: 0950-0618. http://dx.doi.org/10.1016/j.conbuildmat.2008.10.013
NAVARRO, R.; CRUZ, A.; ARRIAGA, L.; BALTUILLE, J. "Caracterización de los principales tipos de mármol extraídos en la comarca de Macael (Almería, sureste de España) y su importancia a lo largo de la historia". Bol. Geol. Min., 2017, 128, 345-393. ISSN: 2253-6167. http://dx.doi.org/10.21701/bolgeomin.128.2.005
PÉREZ, A. Á. "Los mármoles griegos de los montes Pentélico e Himet". Empúries: revista de món clàssic i antiguitat tardana, 1985, 108-119. ISSN: 2385-3352.
WIELGOSZ-RONDOLINO, D. et al. "Improved methodology for identification of Göktepe white marble and the understanding of its use: A comparison with Carrara marble". Journal of Archaeological Science, 2020, 113, 105059. ISSN: 0305-4403. http://dx.doi.org/10.1016/j.jas.2019.105059
BECERRA, J. E. B. “Avaliação da susceptibilidade aos processos de deterioração dos calcários ornamentais da Formação La Tampa usados na construção civil de Medellín-Colômbia”. Tesis de doctorado. Universidade Federal de Minas Gerais, 2009. http://hdl.handle.net/1843/MPBB-7TXMCL
BELL, F. G. Engineering properties of soils and rocks. Edtion ed.: Elsevier, 2013. ISBN: 1483102270.
LUIS, G.; MERCEDES, F.; LUIS, O.; CARLOS, O. Ingenieria geologica. Edtion ed., 2002. 238-301 p. ISBN: 84-205-3104-9.
ROCHA-VARGAS, D. C. et al. "Estudio preliminar de las características petrográficas, petrofísicas y comportamiento mecánico de rocas naturales tipo Piedra Bogotana y Mármol Royal Bronce utilizadas en construcciones patrimoniales y recientes en Colombia 2019. ISSN: 1657-4583. https://doi.org/10.18273/revuin.v18n3-2019021
MATERIALES, S. E. P. P. Y. (2015). Modulus of Rupture of Dimension Stone (ASTM C99).
TEYMEN, A. "Estimation of Los Angeles abrasion resistance of igneous rocks from mechanical aggregate properties". Bulletin of Engineering Geology and the Environment, 2019, 78 (2), 837-846. ISSN: 1435-9537. http://dx.doi.org/10.1007/s10064-017-1134-0.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Ismel Oleandra Pie-Nápoles, Ana Teresa Acebal-Ibarra, María de los Ángeles Arada-Pérez
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
This journal provides immediate open access to its content, based on the principle that offering the public free access to research helps a greater global exchange of knowledge. Each author is responsible for the content of each of their articles.
